CS6P is uniquely designed to provide high-power output for both on-grid and off-grid solar power plants. It is also tailored for people looking for maximum power output in a very limited space.

You can put two of the 200 watt PV modules on our Solar Boost 3024iL controller. This is enough for most conservative boondockers.

Data Sheet Available Here

Features

• 60 polycrystalline solar cells

• Special Aluminum Frame Design: The specially treated frame aluminum substantially increases module endurance against high winds and snow load.

• Reinforced Solar Glass: The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness and impact resistance.

• Advanced Cell encapsulation: The interconnected cells are embedded in ultra transparent EVA with multilayer back sheets for additional weather protection.

• Optimized Module Surface Area: The distance between the frame edge and the cell circuitry is calculated according to the electrical output optimization.

LIMITED WARRANTY
25 years limited warranty on power output. 90% power output assurance for 10 years, and 80% power output assurance for 25 years.

Mechanical Specifications
Dimensions (LWD): 64.5" x 38.7" x 1.6"
Weight:40.8
Frame: Silver
Cell Material: Polycrystalline
Number of Cells: 60

Electrical Characteristics (STC)
Maximum Power (Pmax): 200 Watts
Voltage at Maximum Power (Vmp): 28.9 Volts
Current at Maximum Power (Imp): 6.93 Amps
Open Circuit Voltage (Voc): 36.2 Volts
Short Circuit Current (Isc): 7.68 Amps
Maximum System Voltage: 600V (UL) / 1000V (IEC)
Temperature Coefficient Voltage (Voc): -0.035%/°C
Temperature Coefficient Current (Isc): 0.06%/°C
Module Tolerance: ±5 Watts
Special Note: This is one of the best power tolerance panels on the market today.